Epic International - E-Mail US!!!
[ Home ] [ Aerators ] [ Mixers ] [ Screw Pumps ] [ Flight Deks ] [ Inquiry ] [ About Epic ]

TYPICAL EPIC AERATOR CHARACTERISTICS
Models & Dimensions   Specifications   Special Features   Drawings   Characteristics

Aerator Size (HP) RPM 1ZcmDia. (ft) 2Depth(ft) 3ZODDia. (ft) ImpingementDia. (ft) 4GPM
1 1800 20   65 6.5 1400
2 1800 28 90 6.5 1500
3 1800 40 6 145 13 1550
5 1800 50 -------- 160 15 2900
7.5 1800 55 170 18 4100
10 1800 58 8 180 18 4600
15 1800 65 200 20 5500
20 1800 72 ------- 210 20 6000
25 1800 80 250 20 8200
10 1200 60 180 16 5400
15 1200 70 210 18 8400
20 1200 80 10 250 20 9300
25 1200 85 275 24 11000
30 1200 90 290 24 11800
40 1200 95 ------ 325 25 15750
50 1200 110 330 25 17900
60 1200 115 350 28 18600
75 1200 130 380 30 22800
40 900 115 12 335 25 17300
50 900 120 340 28 23800
60 900 125 360 30 26000
75 900 135 385 35 29400


1 ZCM: Zone of complete mix in typical activated sludge process.
2 Depth: Normal depth where zone of complete mix (ZCM) and zone of oxygen dispersion (ZOD) are accurate.
3 ZOD: Zone of oxygen dispersion.
4 GPM: Direct pumping rate through the volute.
CWTR:
    Clean Water Transfer Rate
    EPIC direct drive floating mechanical aerators are capable of providing a CWTR
    of 3.0 lb O2/Hr/BHP in appropriate conditions.

NOTE:
This data is for general approximate use only. Specific performance is contingent upon basin volume, geometry, power density, etc. Please contact EPIC International or your process-consulting engineer for specific applications.



Environmental Products for Innovative Conservation

E-Mail US!!!
E-mail us at Try@EPICIntl.com

[ Home ] [ Aerators ] [ Mixers ] [ Screw Pumps ] [ Flight Deks ] [ Inquiry ] [ About Epic ]


This page last updated on 08/14/12

If you experience any problems while visiting our site,
please notify our Web Site Manager
Site Designed and Hosted by
Global Web Solutions, Inc.
a Virginia Corporation